Hdbaset hdmi wall plate receiver ir/rs232/poe 100m (16 pages)
Summary of Contents for Avenview W-HDM3D5G-20M
Page 1
No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products of Avenview Inc.
However, like all electronic equipment’s, the W-HDM3D5G-20M should be used with care. Read the following safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
DO NOT TAMPER WITH THE UNIT. DOING SO WILL VOID THE WARRANTY AND CONTINUED USE OF THE PRODUCT. THE VIDEO BOARDS ARE VERY SENSITIVE TO STATIC. PLEASE ENSURE IF RACK MOUNTED OR INSTALLED ON A SURFACE, IT SHOULD BE IN A GROUNDED ENVIROMENT. Page|4 www.avenview.com...
Supporting the point to point transmission function currently which can be expanded to the multi-point to point transmission function. PACKAGE CONTENTS Before you start the installation of W-HDM3D5G-20M, please check the A. STANDARD package contents. Wireless Transmitter Wireless Receiver Power Adapter (5VDC)
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire. Do not twist or pull by force ends of the HDMI cable. It can cause malfunction. Page|6 www.avenview.com...
90 ˚ angle with the body of the unit. Each transmitter and receiver after pairing support only point to point operation. It cannot support signals broadcasting by wireless. Important before starting the insulation please ensure that all devices are powered off Page|7 www.avenview.com...
INSTALLATION STANDARD PACKAGE (W-HDM3D5G-20M) To setup Avenview W-HDM3D5G-20M please follow these steps for connecting to a device: 1. Place the Transmitter unit in close proximity to the HDMI source device. 2. Connect the HDMI source device to HDMI IN port of the Transmitter by using a standard HDMI cable.
IR REMOTE FUNCTIONS (W-HDM3D5G-20M) BUTTON DESCRIPTION MENU Enter Setup Mode EXIT Exit Setup Mode SOURCE Wireless Transmitter List Searching and adding a new Wireless Transmitter DELETE Delete a Wireless Transmitter Enter or Confirm Function SHIFT Transmitter name character editing GUEST...
DIMENSIONS (L X W X H) 11.5” x 1.3” x .5” POWER SUPPLY AC Input 100-240V,DC Output 5V ENVIRONMENTAL OPERATING 32˚ ~ 104˚F (0˚ to 40˚C) TEMPERATURE STORAGE TEMPERATURE -4˚ ~ 140˚F (-20˚ ~ 60˚C) RELATIVE HUMIDITY 20~90% RH (no condensation) Page|12 www.avenview.com...
Page 13
Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission...
Need help?
Do you have a question about the W-HDM3D5G-20M and is the answer not in the manual?
Questions and answers