The contents of this document are provided in connection with Avenview Inc. ("Avenview") products. Avenview makes no representations or
warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted
by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims
any express or implied warranty, relating to its products of Avenview Inc. is strictly prohibited.
Hdbaset hdmi wall plate receiver ir/rs232/poe 100m (16 pages)
Summary of Contents for Avenview W-HDM3D5G-50M
Page 1
No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims...
The Avenview W-HDm3D5G-50m, Wireless Extender has been tested for conformity to safety regulations and requirements, and has been certified for international use. However, like all electronic equipment’s, the W-HDm3D5G-50m should be used with care. Read the following safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
Do NoT TAmpER WITH THE uNIT. DoING So WIll VoID THE WARRANTy AND CoNTINuED uSE of THE pRoDuCT. THE VIDEo BoARDS ARE VERy SENSITIVE To STATIC. plEASE ENSuRE If RACK mouNTED oR INSTAllED oN A SuRfACE, IT SHoulD BE IN A GRouNDED ENVIRomENT. www.avenview.com Page 2...
INTRoDuCTIoN W-HDm3D5G-50m, wireless extender set runs at 5GHz operation frequency to deliver HD video/audio 50 meters in open field. This device kit make wireless connection by using WHDI Technology from HD media Source Devices such as HD Disc or content player, pC, Game Console or Set-to –Box to any display Device for example lCD, plasma or lED TV or projector.
CoNTENTS Before you start the installation of W-HDm3D5G-50m, please check package contents. WIRElESS TRANSmITTER WIRElESS RECEIVER poWER ADApTER (5VDC) REmoTE CoNTRol 2 x HDmI CABlE & 1 x IR CABlE uSER’S mANuAl BEfoRE INSTAllATIoN • put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction.
The Wireless Extender can be used horizontal or vertical mode, depending on your requirement; however for optimum performance is it recommended to operate in vertical mode. To use the extender in vertical mode simply use the base supplied with the unit. • E ach transmitter and receiver after pairing support only point to point operation. It cannot support signals broadcasting by wireless. • Important before starting the insulation please ensure that all devices are powered off www.avenview.com Page 5...
INSTAllATIoN (W-HDm3D5G-50m) To setup Avenview W-HDm3D5G-50m please follow these steps for connecting to a device: 1. place the Transmitter unit in close proximity to the HDmI source device. 2. Connect the HDmI source device to HDmI IN port of the Transmitter by using a standard HDmI cable.
IR REmoTE fuNCTIoNS (W-HDm3D5G-50m) BUTTON DESCRIPTION REGISTRATIoN (to add a wireless transmitter) mENu ENTER Setup mode ExIT ExIT Setup mode SouRCE Transmitter lIST Searching and adding a new Wireless Transmitter Enter or Confirm function INpuT 123 Change source 1,2,3 mENu/Character Selection ...
IR remote pointing to the Receiver unit, oSD menu on display shows 2. press and hold button of the IR remote pointing to the Transmitter until link lED flicker “fast”. oSD menu on Display press button on the IR remote pointing to the Receiver unit. www.avenview.com Page 9...
buttons to select a Transmitter using the IR Remote pointing to the Receiver, and then press the button. Delete a wireless transmitter: press DElETE button, the oSD menu on the display will show, use buttons to select a Transmitter using the IR Remote pointing to the Receiver, and then press the button www.avenview.com Page 10...
• If no picture after Step 1, press REG button on IR remote pointing towards the transmitter (don’t hold REG button). • If no picture after Step 1 and step 2, delete the source and re-add the Transmitter. www.avenview.com Page 11...
SpECIfICATIoNS ITEM DESCRIPTION UNITS W-HDm3D5G-50m-S (Transmitter) W-HDm3D5G-20m-S (Receiver) UNIT DESCRIPTION WIRElESS Transmitter WIRElESS Receiver OPERATING FREQUENCY 5.1GHz to 5.9 GHz 5.1GHz to 5.9 GHz BANDWIDTH 20mhz/40mhz Downlink Channel: ofDm 16-QAm; MODULATION MODE uplink Channel: ofDm-ooK AUDIO FORMAT I2S; pCm; SpDIf; AC-3; DTS; Dolby 5.1/7...
Page 15
PARTS: During the Warranty Period of of THREE (3) YEARS, Avenview will supply new or rebuilt replacements in exchange for defective parts of the product(s) at no cost if the product(s) is determined to have abide by Avenview’s published guidelines. Cost of Parts applicable to product(s) after Warranty Period. For part(s) costs, please contact support@avenview.com.
Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the Avenview hardware, software, or other products and documentation provided herein.
Need help?
Do you have a question about the W-HDM3D5G-50M and is the answer not in the manual?
Questions and answers