Hdbaset hdmi wall plate receiver ir/rs232/poe 100m (16 pages)
Summary of Contents for Avenview FO-4LC-xxM Series
Page 1
No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
Causes external to the product, such as electric power fluctuation or failure. Use of supplies or parts not meeting our specifications. Normal wear and tear. Any other causes which does not relate to a product defect. Removal, installation, and set-up service charges. www.avenview.com...
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. Introduction Avenview FO-4LC-xxM Series with fiber optic cable system lets you extend single link digital signal up to 1000 meters (3300 feet). High Speed and long distance transmission by LC type Multi-Mode fiber...
DVI Port and the Receiver should be connected the DVI Port of the digital display device. Avenview FO-4LC-xxM Transmitter is designed to be used with the LC type standard optical cable. It is marked with R, G, B, O connect. “R” to the Red Color optical cable, “G” to the Green, “B” to Blue and “O” to Orange Avenview FO-4LC-xxM is designed to self detect the resolution of the monitor and change the resolution accordingly.
Check if connection to the computer and the monitor are correct. Check the optical fiber connection Turn the PC Power off and on again. This product supports up to WUXGA resolution. Check the maximum resolution range of the graphics card. www.avenview.com...
Signal Assignment T.M.D.S. Data1- T.M.D.S. Data1+ T.M.D.S. Data1 Shield No Connect No Connect +5V Power Ground (for +5V) No Connect www.avenview.com Signal Assignment T.M.D.S. Data0- T.M.D.S. Data0+ T.M.D.S. Data0 Shield No Connect No Connect T.M.D.S. Clock Shield T.M.D.S. Clock+ T.M.D.S. Clock- Signal Assignment T.M.D.S.
Page 8
Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of...
Need help?
Do you have a question about the FO-4LC-xxM Series and is the answer not in the manual?
Questions and answers