Overall Control Circuitry - Mitsubishi Electric VS-45605 Technical Training Manual

Overall Control Circuitry

The µPC controls the TV's circuitry mainly through
2
three I C data lines, as illustrated in Figure 6-3. Two
2
of the I C lines are dedicated to a specific function:
• EE SDA ... transfers data to and from the
2
E PROM memory IC.
• C-SDA ... Controls the Convergence Cir-
cuitry
2
The E PROM serves the purpose of storing user pro-
gramming and service adjustment data in memory.
Control of the Convergence circuitry is explained
further in the Convergence Section.
2
The third I C data line, MAIN-SDA, controls the
remainder of the circuitry in the TV. All but two of
the controlled circuits shown in Figure 3 are con-
ventional and need no explanation:
• IC2Y02 ... DAC
• IC7V01 ... Line 21 Decoder
IC2Y02 is a Digital to Analog Converter that gener-
ates voltages controlling PIP Sub Picture Color, POP
Main Picture Color, and voltages controlling the
White Balance (Gamma) circuitry.
IC7V01 is a Line 21 Decoder. Program rating in-
formation is transmitted on the 21st horizontal line
in the vertical blanking interval. The Main µPC de-
codes the main picture program rating and if required,
performs the program blocking operation. The Main
µPC cannot decode the program rating of the PIP
sub picture source. IC7V01 performs this function.
Page 6-3