Using The Features; Basic Operation - Grundig GU15WDT Instruction Manual

USING THE FEATURES

Tuning in the TV channels
 After connecting an aerial to your LCD TV and connecting the mains cable to the TV and 230VAC
mains socket, turn the POWER SWITCH of rear TV on, a red light will show on the front centre panel
of the TV.
 Press the POWER button, the red light will change to green and the First Time Installation screen will
show:
1. Make sure an aerial is fitted then press OK button on the remote to start the Auto Programme Scan
(APS).
2. In a short while you will see the TV programmes briefly as each channel is received and stored
in the memory. After analogue tuning is completed a second OSD may show and request start
scan of the digital TV channels. If requested to start scan press the OK button on the remote.
When APS is completed BBC1 Digital TV will show, press CH. +/- buttons to view the other
channels stored. To view analogue TV press INPUT button and use the up / down arrow buttons
to select TV and then Press the OK button.Change channels by pressing the CH. +/- buttons.
 To power off press the POWER button, the green light will change to red.
Selecting a Source
Press the INPUT button to display the function required (TV/AV).
Using the arrow buttons on the remote highlight the function required and press the OK button to select the
function.
Select TV Channel
 Press the CH.+/- button on the remote control or the CH. ▲/▼ button on the LCD TV to change the TV
channels.
 You can directly select the TV channel required by pressing 1, 2 or 3 etc on the remote key pad.
Adjusting the Volume
Press the VOL. +/– button on the remote control or the VOL. +/- button on the LCD TV to adjust the
volume.
To Mute the Sound
 Press MUTE and the sound cuts off.
 To turn mute off, press the MUTE button again, or simply press the VOL. +/- button.
Sleep Timer
Press the SLEEP button continuously to select the sleep timer or turn the sleep timer from the OFF, 15, 30,
60 minutes; when the LCD TV has reached the set time, it will automatically turn off.
0 USING THE FEATURES