Connecting A Tv Cable Or Aerial; Installing The Lcd Tv - Grundig GU15WDT Instruction Manual

Installing the LCD TV

Refer to the owner's manual of any external equipment to be connected.
When connecting any external equipment, do not connect any AC power cords to wall outlets
until all other connections are completed.
Connecting a TV Cable or an Aerial
Aerial Connection
The aerial requirements for Digital TV reception are more important than those for Analogue TV
reception. For this reason, high gain digital TV aerial must be used.
The Power button on the right side of the front panel and also on the remote control is only used for powering up and
switching the TV to standby mode, it does not disconnect the device from the mains supply.
To completely disconnect the main voltage, please switch off the power switch on the rear of the TV, or
remove the power plug from the socket.
POWER
Make sure the power
switch is switched off.
AC 230V~
50HZ
Unplug from
a wall outlet
AC POWER
SWITCH
VHF/UHF IN
AC 230V~ AC POWER PC/VGA IN
50Hz SWITCH
PC AUDIO IN
PREPARATION