Standard Equipment - Viessmann Vitodens 200 WB2 Series Technical Data Manual

Standard Equipment

Standard Equipment
The Vitodens 200 gas-fired condensing
boiler with Inox-Radial heat exchanger
surfaces, modulating MatriX-compact gas
burner for natural gas and liquid propane,
aqua-plate with plug-in connection system
c/w
H pressure gage and KM-BUS variable speed
pump (for WB2 6-24C, 6-24 and 8-32
only)
H installation fittings with 30 psig pressure
relief valve and air vent
H boiler control unit with outdoor
temperature sensor, power module (up to
model WB2 8-32) or power/pump module
(model WB2 11-44 and up)
– The boiler comes fully piped and prewired.
– The Vitodens 200 Combi boiler is
equipped with an integrated stainless steel
plate heat exchanger for instantaneous
DHW heating.
– Venting material (coaxial) is to be supplied
by Viessmann only. Side wall vent
installations must include Viessmann
protective screen!
– Enclosure finish:
black steel, powder-coated white
– The Vitodens 200 comes ready for use
with natural gas and can be fuel
converted to liquid propane.
36
Wall mounting componentry
The following wall mounting components
are supplied with the Vitodens 200 boiler:
H Mounting bracket (comes preinstalled for
models up to WB2 8-32)
H Mounting bolts
H Installation fittings
H Screws for mounting bracket on
– wood studs (2" x 4")
– metal studs
– brick/concrete wall