Audio - ViewSonic PJ402D User Manual

Auto Shutdown Uses this function to automatically turn off the lamp if the
projector does not detect an input signal for specified
time period (30 minutes).
Select the desired setting with the
OSD Timeout Duration OSD (On-Screen Display) menu stays active (at
idle state by second).
Select the desired setting with the
Menu Position Selects the position of the OSD (On-Screen Display) menu
on the screen.
Select the desired setting with the
Factory Reset Resets the projector to its factory default settings.
Press the MENU\ENTER button on the Projector Control Panel or the
Enter button on the Remote Control to enter its sub-menu, select
the desired setting with the
with the MENU\ENTER button on the Projector Control Panel or the
Enter button on the Remote Control again.

Audio

Option Actions/Descriptions
Volume Adjusts the volume.
Select the desired setting with the
Press the
Press the
Mute Cuts off the sound temporarily.
Select the desired setting with the
ON
OFF
ON
OFF
button to decrease the volume.
button to increase the volume.
/ buttons:
/ buttons.
/ buttons.
/ buttons, and confirm the selection
/ buttons:
/ buttons:
ViewSonic PJ402D
32