Powering On/Off The Projector - ViewSonic PJ402D User Manual

Powering On/Off the Projector

Powering On the Projector:
1. Remove the projector lens cap.
2. Complete the AC power cord and peripheral signal cable(s) connections.
3. Press the ON\OFF button on the Projector Control Panel or the
on the Remote Control to turn on the power.
4. Turn on your source (computer, notebook, DVD, etc.). The projector automatically
detects your source.
If the "Searching for source" message appears on the screen, ensure that
the appropriate signal cable(s) are securely connected.
If you are connecting multiple sources to the projector simultaneously, press the
SOURCE button on the Projector Control Panel or the Source button on the
Remote Control to select the desired source.
Warning:
Never look into the lens when the lamp is on. This can damage your eyes. It is
especially important that children are not allowed to look into the lens.
Powering Off the Projector:
1. Press the ON\OFF button on the Projector Control Panel or the
on the Remote Control. A message will appear on the screen:
2. Press the ON\OFF button on the Projector Control Panel or the
on the Remote Control again to turn off the power. Wait until the lamp LED indicator
turns off.
Please wait until the fan motor and the lamp LED turn off before removing
the AC power cord from the projector.
Power button
Power button
Power button
ViewSonic PJ402D
16