Cardo Systems ScalaRider Installation Instructions page 4

CONNECTING AN MP3 PLAYER
Your scala rider communication system can be connected
to an MP3 player by plugging it to the Audio Kit's MP3
cable jack via the MP3 cable.
1. Connect the MP3 cable to your
MP3 player's headphone jack and
the other side to the audio kit's
MP3 cable jack. Make sure that the
cable plug clicks into place.
2. In order to use your MP3 player, turn on the headset and
leave it in Standby mode, flashing slowly in Blue.
NOTES:
1. Operate the MP3 Player by using its buttons (FF/REW/PLAY/
PAUSE).
2. Volume can only be adjusted through the MP3 Player.
3. Any other audio connection will automatically mute the
MP3 Player.
4. The audio signal will return only when headset is once
again in Standby mode.
6
Audio & Microphone Kit for Half-Helmets
SuPPORT
For additional information please visit our website at
www.cardosystems.com
FAQ: www.cardosystems.com/support/faq
or contact us at:
support@cardosystems.com
MP3 cable Jack
Phone:
USA and Canada: 1-800-488-0363
International: +4989 450 36819