Cardo Systems Scala Rider Q3 Quick Manual

communication in motion ®
Q3 / Q3 MultiSet
This Quick Guide is not a substitute to the user manual and addresses only
a limited scope of features and functions of your scala rider Q3.
This reference guide may be useful to look up some basic functions and
commands while you are on the road and have no access to the user manual.
This Quick Guide can be printed and folded for easy reference, or it may be
viewed directly on your smartphone.
| GENERAL FUNCTIONS
1
Press "IC" for 2 seconds
Power ON / OFF ON: 3 BLUE flashes + Ascending tone
OFF: 3 RED flashes + Descending tone
Tap "V+" or "V-" to adjust volume of current
Volume
audio source
Mute Tap "V+" and "V-" simultaneously
In Standby, press "V+" for 2 seconds
• Blue LED = Full charge
Battery level indicator
• Purple LED = Half charge
• Red LED = Almost empty
In standby, press "V+" and "V-" simultaneously
for 2 seconds
Enable / Disable VOX
(For Intercom calls only)
ENABLED: Blue flash for 2 seconds
DISABLED: Red flash for 2 seconds
A2DP audio / Intercom
Via the Voice Menu or the Cardo Community
priority
Enable/Disable
Click-to-Link® (CTL) Via the Voice Menu or the Cardo Community
(Enabled by default)
Enable/Disable Spoken
Status Announcements Via the Voice Menu or the Cardo Community
(Enabled by default)
| VOICE MENU
2
In standby, press "MM" and "IC"
simultaneously for 5 seconds. Follow the
Enter Voice Menu
audio instructions.
Press "MM" for 2 seconds
Exit Voice Menu
| LED
3 STATUS
None scala rider is OFF
Standby mode
1 BLUE flash every
3 seconds
No active audio sources
2 BLUE flashes every
Active mode – Call in progress / music or
3 seconds other audio source is ON
1 RED flash every
Standby mode – Battery is low
3 seconds
2 RED flashes every
Active mode – Battery is low
3 seconds
Solid RED Charging
™
Intercom
Button
Music / Mobile
("IC")
Button ("MM")
| MOBILE PHONE
4
Tap "MM" or speak any word loudly to
Answer a call
answer by VOX
Remain silent for 15 seconds, or press and
Reject a call
hold "MM" for 2 seconds
End a call Tap "MM"
Voice Dial*
Tap "MM" and "IC" simultaneously and
(if supported by mobile
follow the prompt from the mobile
phone)
Redial* Press "MM" and "IC" for 2 seconds
Hot Dial* Tap "MM" 3 times
When on a phone call, press "V+" for
Set default phone
5 seconds
Toggle default phone In Standby, press "MM" for 5 seconds
*This feature is not available during mobile calls
| A2DP MUSIC AND FM RADIO
5
Turn on A2DP Music In Standby, tap "MM"
Turn on Radio In Standby, double tap "MM"
Pause / Stop Audio Press "MM" for 2 seconds
Next Track / Station With audio ON, tap "MM"
Previous Track /Station* With audio ON, double tap "MM"
Music Sharing (via A2DP only)
[SENDER] Start/Stop During A2DP music playback, press "V+" or
sharing your music
"V-" for 2 seconds
[RECEIVER] Stop music
Press "V+" or "V-" for 2 seconds
sharing
*With some phones you may need to repeat this action
| PAIRING BLUETOOTH DEVICES: MOBILE PHONE/
6
GPS/A2DP MUSIC PLAYER
Bluetooth Channel 1
In Standby, press "V+" for 5 seconds
pairing mode
Bluetooth Channel 2
In Standby, press "V-" for 5 seconds
pairing mode
Volume Up
("V+")
Volume Down
("V-")