Waring PRO JEX450 User Manual page 13

POSSIBLE PROBLEM
Machine will not work
when switched on
Motor appears to stall
when juicing
Excess pulp building
up in the filter basket
Pulp too wet
and insufficient
Juice leaks between the
rim of the juicer cover
and the filter bowl
Filter bowl – juice sprays
out from spout
SOLUTION
Make sure unit is plugged into
proper power supply source. Make
sure all parts are in the proper
working position. Press the red reset
button on bottom of unit. Check your
home circuit breaker or fuse panel to
make sure they are live.
Wet pulp can build up under the cover
if the juicing action is too vigorous.
Try slower juicing action by pushing
the food pusher down more slowly.
Stop the juicing process. Remove
the juicer cover and scrape off pulp.
Re-assemble and begin juicing again.
Try alternating (soft and hard)
vegetable and fruit varieties.
Change to low or high speed. Try a
slower juicing action. Remove mesh
filter basket and clean mesh walls
with a fine brush in a solution of 70%
water and 30% bleach. This will
remove excess fiber buildup (from
fruit or vegetables) which could be
inhibiting the juice flow.
Try a slower juicing action by pushing
the food pusher down more slowly.
Make sure unit is clean before use.
Try a slower juicing action by pushing
the food pusher down more slowly.
Make sure juice cup is in proper
position.
12