Operation - Waring PRO JEX450 User Manual

Step 6
To remove the stainless steel filter basket, lift up from
juicer bowl.
Caution: Sharp blades

OPERATION

Note: The juice extractor will not operate until the pulp
container is locked into position. See page 8.
Step 1
Wash your selection of fruit and vegetables for juicing.
Note: Most fruit and vegetables such as apples, carrots
and cucumbers will not need to be cut to size as they will
fit into the feed chute whole.
Step 2
Ensure that the Juicerator ® is correctly assembled and
that the juice collector cup is placed under the spout
while juicing.
Step 3
Plug the power cord into a power outlet. For softer fruits
and vegetables such as melons, spinach, pears, etc., use
the low setting. For harder fruits and vegetables such as
carrots, beets, cabbage, etc., use the high setting.
Toggle to the low or to the high position depending on the
fruit or vegetable being processed. Toggle to the off posi-
tion when process is completed.
Step 4
With the motor running place food down the feed chute.
Using the food pusher, gently guide food down the chute.
To extract maximum juice always push the food pusher
down slowly. Make sure flat area of food pusher is aligned
to flat area of feed chute. The food pusher is marked with
an arrow for easy lineup.
9