Rosen AV7700 Installation Manual page 5

Installing AV7700 Electronics
You will need to install the AV7700 electronics and route the cable through the seat backs. The
following steps will guide you through this process.
Note: Mercedes-Benz GL/ML/R installation shown
Route cables into seat along post guides.
Cables are Left/Right specific based on mounting
orientation of electronics
(Both cables will be black with connection points
being color specific. IE: Black & Grey)
Locate mounting bushings.
Bushings are labeled specific for Left or Right
for each post guide. See next step
Once cables have been routed into seat, insert
mounting bushings.
A = Left side of post guide
B= Right side of post guide
NOTE: Do NOT pinch cables
Both mounting bushings installed.
Caution: Do NOT pinch cables
Mount AV7700 electronics into mounting
bushings as shown while pulling excess slack
from cables
Rosen Entertainment Systems
AV7700 System Installation Guide
Installation Guide AV7700
STEP
5
CAUTION
Copyright 2010 All Rights Reserved
AP2004-MB Rev A
Page 5