You will need to install the vehicle specific mounting brackets.
The following steps will guide you through this process
Note: Mercedes-Benz GL/ML/R installation shown
Locate hardware mounting kit.
(Part# MB100B contents shown)
Locate clean, non-abrasive working surface to
prepare the headrest units.
Determine the proper mounting bracket positions
according to your vehicle application. See Below
Attach mounting brackets to electronics by using 4 supplied screws
Rosen Entertainment Systems
AV7700 System Installation Guide
Installation Guide AV7700
Prepare Electronics
Spacing will vary by application.
Use image below as a reference.
STEP
2
Copyright 2010 All Rights Reserved
AP2004-MB Rev A
Page 3