Table of Contents
Advertisement
Using a Door Intercom
Door Intercom
If you have a BT Inspiration door intercom, anyone
visiting your premises can call you when they arrive, so
you can speak to them before you let them in.
If you have a doorstrike fitted, you can open the door
from your phone.
Your BT engineer can provide the connection for a
doorstrike but you must purchase the doorstrike yourself,
and arrange for a qualified electrician to install it.
Answering a door intercom call
One phone or a group of phones may be programmed
to ring when someone calls at the Door Intercom
To answer a door intercom call, lift the handset and
speak (there is no code to dial).
Programming a Door Intercom
From the programming position, press the phone
P
set up key
and select 'System programming'
Enter the PIN and select 'System'
Select 'Door intercom'
Select 'Door intercom equipped'.
To select which extensions are to ring when the
Door Intercom is used
From the programming position, press the phone
P
set up key
and select 'System programming'
Enter the PIN and select 'Lines'
Select 'Day ringing phones'
Select 'Door intercom'. The extension menu is
presented. Select the extensions that are to ring for
calls on the Door Intercom. These phones are
indicated with a solid diamond. When the
extensions are selected scroll to the end of the
extension list and press 'Cancel' or press the Up
scroll key for two seconds
When you have programmed the Door Intercom in
the Day group repeat the procedure with 'Night
ringing phones' for the Night group.
Opening the door (doorstrike)
If you have a doorstrike installed, select the 'Open the
Door' display prompt.
On an ordinary telephone, the code is R86 when on a
call, and 86 if you are not on a call.
You can restrict certain extensions from being able to
open the door in programming. In default all extensions
are restricted from opening the door.
From the programming position, press the phone
P
set up key
and select 'System programming'
Enter the PIN and select 'Extensions'
Select 'Open door restriction'
Select the extensions that are to be allowed to open
the door. The extensions that are restricted from
opening the door are indicated with a solid diamond
Press HANDS FREE to finish programming.
Doorstrike mechanism connection
Operating the doorstrike (86) mechanism from a
Inspiration telephone causes the switch to close. The
switch is a dry contact, i.e. it provides no voltage and
has a maximum power rating as shown. The
Connection Box can be provided by BT.
If an attempt is made to remove extension 20 without
programming another extension the prompt 'Minimum
reached' will be displayed and extension 20 will remain
programmed. Similarly if an attempt is made to remove a
single extension the same prompt will be given.
BT
Inspiration
Control
Unit
(Max rating of the switch
is 24 volts DC, 2amps)
x
x
Connection Box
33
This is the point that the electrician/locksmith
connects the doorstrike mechanism wiring
Advertisement
Table of Contents
