Setting A Delay Start - Baumatic BTM25.3SS Instruction Manual

o It is possible to program a further 3 cooking phases by following
the above two steps.
o When you have set the final cooking phase close the microwave
door. IMPORTANT: You should make sure that the door of the
microwave is shut securely. Press the instant start button (F)
and the microwave will start the first cooking phase.
o When the first cooking phase has completed, it will automatically
move onto the next cooking phase.
o At the end of all of the cooking phases, your microwave will give
an audible signal and the LED display will show the word "END".
o The audible signal will be repeated every 3 minutes, until the
stop clear button is pressed or the door is opened by pressing
the door open button.
o After the food has been removed from the microwave, you
should make sure that the door is closed.

Setting a delay start

This function will allow you to set a time in the future that the
microwave will switch on at.
o IMPORTANT: You must make sure that the clock is set to the
correct time before using this feature.
o IMPORTANT: It is not possible to set a delay start when using
automatic cooking, automatic defrost or quick start.
o IMPORTANT: You will need to leave the microwave door open
to access the control panel and set the required power level and
time.
o Set the power level and cooking time (as described previously in
this instruction manual).
o DO NOT press the instant start button (F) at this point,
otherwise the microwave will start cooking immediately.
o Press and hold down the preset clock button (C) until you hear a
brief audible signal.
o Press the time weight button (I) and the hour digits will start to
flash. Continue to press the time weight button until the hour
digit that you want the cooking to start at is displayed.
18