Setting Multiple Cooking Phases - Baumatic BTM25.3SS Instruction Manual

A.4 Beverage Use a cup with a large opening and
A.5 Beverage
A.6 Potato
A.7 Potato
A.8 Fish
o The automatic cooking times are suitable for food that is stored
at room temperature.
o The temperature, weight and shape of the food will all influence
the final cooking results. It is possible to adjust the cooking
times to suit personal preference.
o Close the microwave door. IMPORTANT: You should make sure
that the door of the microwave is shut securely. Press the instant
start button (F) and the microwave will start to heat.
o At the end of the cooking time, your microwave will give an
audible signal and the LED display will show the word "END".
o The audible signal will be repeated every 3 minutes, until the
stop clear button is pressed or the door is opened by pressing
the door open button.

Setting multiple cooking phases

It is possible to set the microwave to cook at different power levels
within a single cooking time. A maximum number of 4 cooking phases
can be set at once.
o IMPORTANT: You will need to leave the microwave door open
to access the control panel and set the required power level and
time.
o Press the micro power button (A) to set the required power level
for the first cooking phase. 100P, 80P, 60P, 40P, 20P will appear
on the LED display.
o Press the time weight button (I) to set the cooking time for the
first cooking phase.
DO NOT cover it.
As A.4
Cut the potatoes into 5 cm³ pieces.
Place them into a large dish and put
a suitable microwave cover over the
dish.
As A.6
Wash the fish, remove the scales and
make slits into the skin. Place the fish
in a shallow dish and then season as
required. Put a suitable microwave
cover over the dish. After cooking,
stand for 2 minutes.
250 ml
500 ml
450 g
650 g
450 g
17