Delay Start Function - Baumatic BTM25.7SS Instruction Manual

Delay start function

If you do not wish for the cooking process to be started immediately,
you can preset the cooking function and time and the microwave will
begin at your set time.
o Use the door release button to open the door of the microwave.
o Check that the turntable shaft, turntable ring assembly and glass
tray are correctly assembled in the cavity.
o Place whatever you are cooking in the centre of the microwave
cavity.
o Press the Stop.Clear button (2) once when the colon flashes on
the LED display.
o Select the required microwave power by pressing the microwave
power button (5).
o You can then set the desired cooking time by pressing the
Weight.Time.Temp button (8) to decrease and the Auto Cooking
button (6) to increase.
o Then hold the Preset.Clock button (3) for 3 seconds until a short
beep is heard. Set the time you would like the microwave oven
to start cooking at.
o Use the Weight.Time.Temp button (8) and Auto Cooking button
(6) to set the hours. Press the Preset.Clock button (3) again.
o Use the Weight.Time.Temp button (8) and Auto Cooking button
(6) to then set the minutes. Press the Preset.Clock button (3) to
confirm the delayed start time.
o Now the program has been activated and the microwave will turn
on accordingly. You can check the preset time by pressing the
Preset.Clock button (3).
o Close the microwave oven door.
o If you wish to remove the food before the preset time, you must
press the Stop.Clear button (2) once to clear the preset program
to avoid unintended operation during next use.
o At the end of the cooking time, the LED display will show "End"
and 3 beeps will sound to prompt you to remove the food from
the microwave. If you do not press the Stop.Clear button (2)
once or open the door, the beep will sound every 3 minutes.
24