Automatic Cooking Programmes - Baumatic BTM25.3SS Instruction Manual

o Once the correct defrost programme is displayed, press the time
weight button (I) to set the weight of the food that you are
defrosting.
o Close the microwave door. IMPORTANT: You should make sure
that the door of the microwave is shut securely. Press the instant
start button (F) and the microwave will start to defrost.
o At certain points in the defrosting process, the microwave will
give an audible signal. When this occurs, you should open the
door of the microwave and turn the food over.
o To restart the cooking process, close the door and then press the
instant start button once.
o At the end of the defrosting time, your microwave will give an
audible signal and the LED display will show the word "END".
o The audible signal will be repeated every 3 minutes, until the
stop clear button is pressed or the door is opened by pressing
the door open button.

Automatic cooking programmes

o Use the door open button (7) to open the door of the
microwave.
o Check that the rotating plate and rotating base are correctly
assembled in the cavity.
o Place whatever you are cooking in the centre of the microwave
cavity. IMPORTANT: You will need to leave the microwave door
open to access the control panel and set the required automatic
cooking program and time.
o Press the auto cooking button (H) and the LED display will show
A.1 – A.8.
LED Food
display group
A.1 Popcorn
A.2 Popcorn
A.3 Pizza
Cooking guidance
Suitable for popping a bag of corn,
which are available at supermarkets.
If during cooking the popping speed
slows to once every 1 – 2 seconds,
press the stop clear button to end the
process.
As A.1
Suitable for warming a piece of
chilled pizza.
Maximum
weight
85 g
100 g
150 g
16