Amana AGS730 Service Manual page 41

Troubleshooting Procedures
!
WARNING
PROBLEMS
7 Oven does not
"AUTO BAKE."
8 Oven does not
operate in
"DELAYED BAKE."
9. Oven does not
operate in
"SELF-CLEAN."
To avoid the risk of electric shock, personal injury or death, disconnect power To avoid the risk of electric shock, personal injury or death, disconnect power
To avoid the risk of electric shock, personal injury or death, disconnect power To avoid the risk of electric shock, personal injury or death, disconnect power To avoid the risk of electric shock, personal injury or death, disconnect power
before servicing, unless testing requires it. before servicing, unless testing requires it. before servicing, unless testing requires it. before servicing, unless testing requires it. before servicing, unless testing requires it.
POSSIBLE CAUSE
A. Controls not set correctly.
Failed selector switch.
B.
Failed timer.
C.
Failed ERC.
D.
Faulty wiring.
E.
Failed thermostat.
F.
A. Controls not set correctly.
Failed selector switch.
B.
Failed timer.
C.
Failed ERC.
D.
Faulty wiring.
E.
A. Controls not set correctly.
Failed latch switch.
B.
Failed timer.
C.
Failed selector switch.
D.
Failed ERC.
E.
Faulty wiring.
F.
CORRECTION
A. Instruct customer on proper use of
"AUTO BAKE" function.
B. Check selector switch contacts. See
test procedure on page 37.
C. Check timer contacts. Replace timer if
contacts do not close.
D. See ERC test procedures in Clock
Timer Operation section.
E. Check for broken wires and loose or
dirty connections.
F. Check thermostat contacts. See test
procedures on page 36.
A. Instruct customer on proper use of
"DELAYED BAKE" function.
B. Check selector switch contacts. See
test procedure on page 37.
C. Check timer contacts. Replace timer if
contacts do not close.
D. See ERC test procedures in Clock
Timer Operation section.
E. Check for broken wires and loose or
dirty connections.
A. Instruct customer on proper use of
"SELF-CLEAN" function.
B.
Check latch switch(es) contacts for
continuity.
C.
Check timer contacts according to test
procedures.
D.
See selector switch test procedures on
page 37.
E. See ERC test procedures in Clock
Timer Operation section.
F.
Check for broken wires and loose or
dirty connections.
41 RB231001 Rev. 4