Connection Status; Hardware; Software Versions - Aethra Vega X3 User Manual

Connection Status

This section contains information about call status, including parameters such as
incoming and outgoing audio and video bandwidth, incoming and outgoing video
frame rates, and protocols in use.
C
The page is displayed in a window overlaid on the current video.
ONNECTION STATUS
The CANCEL key on the remote control can be used to change the transparency. To
OK up down arrows
move within the table, press the key, then use the and keys to
left arrow
navigate. To exit the page, press the keys.
ISDN
In an ISDN call, you can check certain data about the connection: rate, audio
encoding, video encoding, frames/sec., and status of data channels.
OK
In addition, by going to the Accesses icon and pressing , you can enter a page of
advanced diagnostics, used to monitor in greater detail the state of individual ISDN
accesses.
For each access you can see whether it is configured or not, whether it is active or
not, and for each single access channel you can gain information such as the state,
the number, cause of disconnection, "Error H.221" messages, and the delay.
IP
For IP calls, you can check certain data related to the Audio and Video IP connection:
bit rate, audio and video encoding types, frames/packets (for audio), frames/sec. (for
video), and number of lost packets.

Hardware

This section contains basic hardware information such as internal temperature and
MAC address. Information about the processor and audio/video system can also be
found in the Audio and Video submenus.

Software Versions

This section shows contains information about the software modules installed on the
system, including versions, build dates, etc.
87