To Enjoy High Bit Rate Audio And Video; Enjoying High Bit Rate Audio With 7.1Ch Speaker; Regarding 24P Output - Panasonic Diga DMR-BW850 Operating Instructions Manual

To enjoy High Bit rate Audio and Video

Enjoying High Bit rate Audio with 7.1ch speaker

This unit can decode high bit rate audio (Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio) adopted
in BD-Video.
To enjoy 7.1ch surround sound, the following conditions are necessary (Part shown in the shaded area of table given below).
Connect an amplifi er/receiver with 7.1ch speaker supporting HDMI (High Bit rate Audio) using a High Speed HDMI cable. (➡ 99)
Set "BD-Video Secondary Audio" to "Off" in the Setup menu. (➡ 89)
Set "Dolby D/Dolby D +/Dolby TrueHD" or "DTS/DTS-HD" to "Bitstream" or "PCM" in the Setup menu. (➡ 89)
About audio from audio output terminal
Connect an amplifi er/receiver and confi rm the desired audio type and necessary settings ("BD-Video Secondary Audio", "Dolby D/Dolby D +/
Dolby TrueHD" or "DTS/DTS-HD").
The number of channels listed is the maximum possible number of output channels.
Also, depending on the specifi cations or the settings of the amplifi er/receiver, the results of the output may vary.
Terminal
"Dolby D/Dolby D +/
Dolby TrueHD"/
"DTS/DTS-HD"
"BD-Video
"On"
Secondary Audio"
Dolby Digital/
Dolby Digital/
Dolby Digital
Dolby Digital EX
5
EX
Dolby Digital Plus
Dolby Digital
Dolby TrueHD
DTS Digital
DTS Digital
Surround/ Surround/DTS-
DTS-ES ES
5
DTS-HD High
Resolution Audio
DTS Digital
Surround
DTS-HD Master
Audio
Down-mixed
7.1ch LPCM
5.1ch PCM
1 When the connected equipment is not supported with these audio format, the audio is output as Dolby Digital bitstream, DTS Digital Surround
bitstream or down-mixed 2ch PCM (e.g., TV).
: When playing BD-Video without secondary audio or clicking sound, the audio is output as the same format as if "BD-Video Secondary
2 BD-V
Audio" was set to "Off" in the Setup menu. (➡ 89)
When the connected equipment is not supported with multi-channel surround, the audio is output as down-mixed 2ch PCM.
3
: When the connected equipment is supported with 7.1 channel surround, the audio output is amplifi ed from 5.1ch or 6.1ch to 7.1ch
4 BD-V
depending on the DTS, Inc. specifi cations.
With PCM output, Dolby Digital EX becomes PCM audio decoded as Dolby Digital, DTS-ES recorded to DVD-Video becomes PCM audio
5
decoded as DTS Digital Surround, and DTS-ES recorded to BD-Video becomes PCM audio decoded as DTS-ES.
6 : When "BD-Video Secondary Audio" is set to "On" in the Setup menu, Dolby Digital EX is output as Dolby Digital and DTS-ES is output
BD-V
as DTS Digital Surround, however if playing BD-Video without secondary audio or clicking sound, the audio is output as the original format.
Note
When setting "BD-Video Secondary Audio" to "Off" in the Setup menu, the clicking sound on the menu and audio with secondary video in
picture-in-picture mode (➡ 42) cannot be output.

Regarding 24p output

Many BD-Video movie contents are recorded in 24 frames/second in accordance with the fi lm materials. However, they will normally be output in
60 frames/second in accordance with the display format.
These can be output in 24p as the original. Therefore, high-quality video can be enjoyed, such as the improved clarity, enhanced perspective,
etc.
Preparation
Connect to a TV supporting 1080/24p input via an HDMI cable.
Set "BD-Video 24p Output" to "On" in the Setup menu. (➡ 91)
HDMI AV OUT
"Bitstream"
1
2 "Off"
Dolby Digital/
Dolby Digital EX
6
Dolby Digital Plus
Dolby TrueHD
DTS Digital
Surround/
DTS-ES
6
DTS-HD High
Resolution Audio
DTS-HD Master
Audio
7.1ch PCM
"PCM"
3
"On" "Off"
5.1ch PCM
5.1ch PCM 7.1ch PCM
2
5.1ch PCM
DVD-V
7.1ch PCM
BD-V 4
7.1ch PCM
4
Down-mixed
7.1ch PCM
5.1ch PCM 2
DIGITAL AUDIO OUT
"Bitstream" "PCM"
"On"/"Off" "On"/"Off"
Dolby Digital/
Dolby Digital
EX 6
Dolby Digital
DTS Digital
Surround/ Down-mixed 2ch
DTS-ES PCM
6
DTS Digital
Surround
Down-mixed 2ch
PCM
RQT9433
43