Panasonic Diga DMR-BW850 Operating Instructions Manual page 91

HDMI Connection
Press [OK] to show the following settings.
HDMI Video Mode
Select "On" when video is output from HDMI AV OUT terminal.
[On]
[Off] When the equipment such as amplifi ers is
connected using HDMI cable, and TV is connected
to the COMPONENT VIDEO OUT terminal (setup
before connecting to the amplifi ers.)
HDMI Video Format
You can only select items compatible with the connected
equipment. This setting normally does not need to be changed.
However if you are concerned about output picture quality, it
may be improved by changing the setting.
To enjoy High Quality Video up-converted to 1080p, you need
to connect the unit directly to 1080p compatible HDTV. If this
unit is connected to an HDTV through other equipment, it
must also be 1080p compatible.
[576p/480p]
[720p] All images other than 720p will be output as
1080i.
[1080i]
[1080p] When outputting 1080p signal, we recommend
using High Speed HDMI Cables that have the
HDMI logo (as shown on the cover) and are
less than 5.0 meters to prevent video distortion
etc.
[Automatic] Automatically selects the output resolution best
suited to the connected television (1080p,
1080i, 720p or 576p/480p).
Press and hold [ g ] and [ q ] (PLAY) for more than 5 seconds
when the image is disturbed by changing the setting. It will be
set to "576p/480p".
BD-Video 24p Output
When playing BD-Video recorded in 24 frames, this unit
displays each frame at 1/24 second intervals the same interval
originally shot with the fi lm movie.
This item is effective only when the unit is connected to a TV
with an HDMI terminal that supports 1080/24p input.
[On]
Images in 24p are output in 24p as they are. (Only
when "HDMI Video Format" is "Automatic" or
"1080p")
However,
– when video is being output at 24 frames, images
from any other terminal than the HDMI terminal
may not be output properly.
– when images other than 24p are played, images
are output at 60p.
[Off]
HDMI Audio Output
[On]
[Off] When connected to TV with HDMI cable, and
connected to amplifi ers not compatible to HDMI with
the DIGITAL AUDIO OUT terminal
VIERA Link
Set to use "HDAVI Control" function when connected with an
HDMI cable to a device that supports "HDAVI Control".
[On]
[Off] Select when you do not want to use "HDAVI
Control".
Component Resolution
This sets the video output resolution when using the component
video terminal.
[576i/480i] [576p/480p]
If it is set to "720p", images other than "720p" will be output as
"1080i".
Even if you select "720p" or "1080i", the video output resolution
is restricted to "576p/480p" when HD contents recorded on this
unit, DVD-Video discs, DivX and BD-Video discs recorded at a
rate of 50 fi elds per second and images via AV1, AV2 or DV
input are output from the COMPONENT VIDEO OUT terminals.
[720p] [1080i]
RQT9433
91