To enjoy High Bit Rate Audio and Video
Enjoying High Bit Rate Audio with 7.1ch speaker
This unit can decode High Bit Rate Audio (Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio)
adopted in BD-Video.
To enjoy 7.1ch surround sound, the following conditions are necessary (Part shown in the shaded area of table given below).
≥Connect an amplifier/receiver with 7.1ch speaker supporting HDMI (High Bit Rate Audio) using a High Speed HDMI cable. (
≥Set "BD-Video Secondary Audio" to "Off". (
≥Set "Dolby D/Dolby D +/Dolby TrueHD" or "DTS/DTS-HD" to "Bitstream" or "PCM". (
About audio from audio output terminal
Connect an amplifier/receiver and confirm the desired audio type and necessary settings ("BD-Video Secondary Audio", "Dolby D/Dolby D +/
Dolby TrueHD" or "DTS/DTS-HD").
≥The number of channels listed is the maximum possible number of output channels.
≥Also, depending on the specifications or the settings of the amplifier/receiver, the results of the output may vary.
Terminal
"Dolby D/Dolby D +/Dolby
TrueHD"/
"DTS/DTS-HD"
"BD-Video Secondary
Audio"
Dolby Digital/
§6
Dolby Digital EX
Dolby Digital EX
Dolby Digital Plus
Dolby TrueHD
DTS Digital Surround/
§6
DTS-ES
DTS-HD High Resolution
Audio
DTS-HD Master Audio
7.1ch LPCM
§1
When the connected equipment is not supported with these audio format, the audio is output as Dolby Digital bitstream, DTS Digital Surround
bitstream or down-mixed 2ch PCM (e.g., TV)
§2
[BD-V]: When playing BD-Video without secondary audio or clicking sound, the audio is output as the same format as if "BD-Video Secondary
Audio" was set to "Off". (
91)
§3
When the connected equipment is not supported with multi channel surround, the audio is output as down-mixed 2ch PCM.
§4
[BD-V]: The audio is output as 5.1ch when "7.1ch Audio Reformatting" in the Setup menu (
§5
[BD-V]: The audio output is amplified from 5.1ch or 6.1ch to 7.1ch depending on the DTS, Inc. specifications regardless of the setting of "7.1ch
Audio Reformatting" in the setup menu (
§6
With PCM output, Dolby Digital EX becomes PCM audio decoded as Dolby Digital, DTS-ES recorded to DVD-Video becomes PCM audio
decoded as DTS Digital Surround, and DTS-ES recorded to BD-Video becomes PCM audio decoded as DTS-ES.
§7
[BD-V]: When "BD-Video Secondary Audio" is set to "On", Dolby Digital EX is output as Dolby Digital and DTS-ES is output as DTS Digital
Surround, however if playing BD-Video without secondary audio or clicking sound, the audio is output as the original format.
[Note]
≥When setting "BD-Video Secondary Audio" to "Off", the clicking sound on the menu and audio with secondary video in picture-in-picture mode
(
46) cannot be output.
Regarding 24p output
Many BD-Video movie contents are recorded in 24 frames/second in accordance with the film materials. However, they will normally be output in
60 frames/second in accordance with the display format.
These can be output in 24p as the original. Therefore, high-quality video can be enjoyed, such as the improved clarity, enhanced perspective, etc.
Preparation
≥Connect to a TV supporting 1080/24p input via an HDMI cable.
≥Set "BD-Video 24p Output" to "On". (
91)
HDMI AV OUT
§1
"Bitstream"
§2
"On"
"Off"
Dolby Digital/
Dolby Digital/
§7
Dolby Digital EX
Dolby Digital Plus
Dolby Digital
Dolby TrueHD
DTS Digital
DTS Digital
Surround/
Surround/
§7
DTS-ES
DTS-ES
DTS-HD High
Resolution Audio
DTS Digital
Surround
DTS-HD Master
Audio
7.1ch PCM
93).
93)
91)
§3
"PCM"
"On"
"Off"
[DVD-V] 5.1ch PCM
[BD-V] 7.1ch
§4
§2, 4
7.1ch PCM
7.1ch PCM
[DVD-V] 5.1ch PCM
[BD-V] 7.1ch PCM
§5
§5
7.1ch PCM
93) is set to "Off".
102)
DIGITAL AUDIO OUT
"Bitstream"
"PCM"
"On"/"Off"
"On"/"Off"
Dolby Digital/
§7
Dolby Digital EX
Dolby Digital
DTS Digital
Surround
Down-mixed 2ch
§7
DTS-ES
PCM
DTS Digital
Surround
Down-mixed 2ch
PCM
RQT9434
47