Table of Contents
Advertisement
16. T
ROUBLESHOOTING
If there is little or no sound from your speakers, check these settings:
• Make sure a signal source is connected and producing sound.
• Make sure speakers are aimed at the target listening area.
• Make sure the power cord is plugged in and the green LED is illuminated at the rear
of the unit.
• Check to ensure the amplifier is turned on and connected to the speaker(s).
• Make sure none of the speaker wires are damaged (frayed, cut, etc.).
• Make sure no wires are touching other wires/terminals (can create short circuit).
• Experiment with different locations and/or angles for optimal audio placement.
If the above measures do not correct the problem, please contact HyperSound at
hs.sales@turtlebeach.com or call (888) 477-2150.
18
©2014 Turtle Beach Corporation. All rights reserved.
Advertisement
Table of Contents
Need help?
Do you have a question about the Hyper Sound and is the answer not in the manual?
Questions and answers