Table of Contents
Advertisement
o Check that the blast chiller is empty and that the door is closed.
o Press the 3°C blast chiller cycle with core probe
simultaneously to select this cycle.
indicates that the chosen cycle has started co
o After a few minutes, a buzzer will signal the best time to put the
food to be deep-frozen into the appliance.
o Put the food into the appliance within five minutes otherwise the
appliance will be switched off and it will be necessary to start
the procedure again from the beginning.
o Insert the probe, ensuring that the tip is at the centre of the
product and close the door.
flash in order.
approximately twenty seconds. To end the cycle, open the door.
o At the end of the cycle, the chill blaster will switch into
maintenance mode until the door is opened. The product will
remain in a thermal range of -16°C - -20°C.
button (1) and the -18°C standard foods deep-
freezing cycle with core probe button (2)
o The display will show the 3°C blast chiller
icon (7), -18°C deep-freezing icon (8)
and
the core
o On the display, the progression icons (10,
11 and 12) show the different stages of
the cycle and will switch off in turn and
o At the end of the cycle, the progression
icons (10, 11 and 12) will flash together
with
a
buzzer
probe
icon (9) which
rrectly.
which
will
sound
for
14
Advertisement
Table of Contents
