Shutting The Inverter Off; Operating Normal Loads - Duracell Digital Inverter 800 Owner's Manual

Overload Shutdown If you connect an AC load that is rated too high
(see Table 3) or a load that draws excessive surge power, the Inverter
shuts down. The overload error code 'E03' will show on the digital
display.
Important: If the inverter is connected to a vehicle's DC accessory
socket or 12 V outlet when an overload occurs, the DC accessory
socket fuse can blow. If that happens, replace the fuse with a similar
one as recommended in your vehicle's manual and follow the section,
"Connecting loads", if your AC product is rated more than 150 watts.
The overload error code 'E03' may show on the digital display.
Overheating Shutdown The Inverter shuts down automatically if it
exceeds its safe operating temperature. The overheating error code
'E04' will show on the digital display.

Shutting the inverter off

• If you are going to disconnect the battery, turn the inverter off first.
• Turn the inverter off by holding the switch until the display turns
off.

Operating normal loads

The Inverter is capable of continuously powering most 120 V AC
products with the following power rating maximums:
15