The recorded content will be lost when the power
is turned off.
2.Recording
When you begin recording, the recording time will
be indicated as a numerical value and by a value
graph.
If the recording mode is set to "JAM," the re-
cording time will not be displayed.
When you want to stop recording, press the EN-
TER/REC button or the [
and loop playback will begin automatically.
If you do not stop recording, recording will contin-
ue until the selected recording time has elapsed,
and loop playback will begin automatically.
If the recording mode is "JAM," recording will end
automatically at the specified number of mea-
sures, and will switch to loop playback.
Recording
time display
]. Recording will stop,
The phrase will be recorded and played back in
mono.
3.Playback
The recording phrase will playback as a loop.
During playback or while paused, you can use
the L/M buttons to select programs.
Rotating the Value dial toward the left will slow
down the playback speed without affecting the
pitch. You can choose from six levels of playback
speed: 100%, 90%, 80%, 75%, 66%, and 50%.
During playback, you can press the [
to rewind.
By pressing the PHRASE TRAINER button, you
can hold the sound that was being played at the
moment you pressed the button (the Hold func-
tion). This is convenient when you need to hear
individual notes in a phrase.
playback
time display
playback speed(%)
] button
21