Specifying The Function Of The Value Dial - Korg Pandora PX4B REMS Owner's Manual

Tune the string of your bass so that the indicator
above the center mark is lit.
The tuner (bypass/mute) will be turned off when
you press either the TUNE/BYPASS button.
You can also return to Play mode by pressing the
EXIT button.
Calibration
(frequency of the standard A = 440 pitch)
You can use the Value dial to adjust calibration
in the range of A = 438 Hz...445 Hz.
The calibration setting you make will be valid until
the power is turned off. Once the power is turned
off, calibration will be reset to A = 440 Hz.

5.Specifying the function of the Value Dial

You can specify the function that the Value dial
will perform in Play mode. In Play mode, hold
down the EXIT button and press either the √
button or the ® button to assign the following
functions.
G Hold down the EXIT button and press the √
button.
The LCD will indicate "MASTER" for approxi-
mately one second.
The Value dial will adjust the master level, and
the L/M buttons will select programs. You can
use the Value dial to adjust the master level
quickly. Each time the power is turned on, this
setting will be in effect.
Adjust the
master level
Select a program
15