Bissell 5200 Series User Manual page 8

How To Use Your Flip-It Hard Floor Cleaner
Getting Ready
Remove the Clean Tank from the machine. Unscrew
1.
the Black cap and remove the valve at the bottom
of the solution tank.
Filling the Clean Tank:
2.
Fill with BISSELL Formula to the Formula fill line
and fill with Water to the Water Line. Replace the
Valve and Cap Assembly. Place the full tank back
into the unit.
Inserting The Gentle Clean™ Brush or Pad
The first time you use your unit, the Gentle Clean™
Pad will be in the unit. Based on your flooring type
and personal preference, you may want to change
to the Gentle Clean™ Brush.
Cleaning Fluid Section
Keep plenty of genuine BISSELL Hard and Wood
Floor Cleaning Solutions on hand so you can clean
when it fits your schedule. Always use genuine
BISSELL cleaning formulas.
32 oz. 32 oz.
0482 0484
Tip:
When using a Dry Gentle
Clean™ Pad, you may
want to get it slightly damp
by Squeezing the trigger
to saturate the pad prior to
attaching it to the Pad Plate.
This will aid in the flow of
water and formula to clean
sticky grime and spots.
Tip:
When plugging the unit
in, make sure to hook the
power cord into the Cord
Clip. This will help guide the
power cord when you flip
from Dry to Wet Cleaning.
Tip:
Use only specially
formulated BISSELL Hard
Floor and Wood Floor
Solutions formula. Non-
BISSELL cleaning formulas
may harm the machine and
void the warranty.
7