Download Print this page


When using an electrical appliance, basic
precautions should be observed, including the
Read all instructions before using your
To reduce the risk of fire, electric shock or injury:
Use indoors only .
Do not leave FLIP-IT
Do not service FLIP-IT
Do not use with damaged cord or plug.
Do not use FLIP-IT
damaged, left outdoors or dropped into water,
have it repaired at an Authorized Service Center.
Do not pull or carry by cord, use cord as a
handle, close door on cord, pull cord around
sharp corners or edges, run appliance over
cord, or expose cord to heated surfaces.
Do not carry the appliance while in use.
Do not handle FLIP-IT
wet hands.
Do not put any object into appliance openings,
use with blocked opening, or restrict air flow.
Do not expose hair, loose clothing, fingers or
body parts to openings or moving parts.
Do not pick up hot or burning objects.
Do not pick up flammable or combustible materials
(lighter fluid, gasoline, kerosene, etc.) or use in the
presence of explosive liquids or vapor.
Do not use appliance in an enclosed space filled
with vapors given off by oil base paint, paint thinner,
some moth proofing substances, flammable dust, or
other explosive or toxic vapors.
Do not pick up toxic material (chlorine bleach,
ammonia, drain cleaner, gasoline, etc.).
Do not allow to be used as a toy.
Do not use for any purpose other than
described in this User's Guide.
Connect to a properly grounded outlet only
See Grounding Instructions.
Unplug from outlet when not in use and before
conducting maintenance or trouble shooting.
Do not unplug by pulling on cord.
Use only manufacturer's recommended attachments.
Use only cleaning products formulated by
BISSELL for use in this appliance to prevent
internal component damage. See Cleaning
Fluid Section of the manual.
Keep openings free of dust, lint, hair, etc.
Keep appliance on a level surface.
Turn off all controls before unplugging.
Unplug by grasping the plug, not the cord.
Be extra careful when cleaning stairs.
when it is plugged in.
when it is plugged in.
if it has been dropped,
plug or appliance with
Do not use without filter in place.
Close attention is necessary when used by or
near children
The Power Cord of this unit
contains chemicals, including lead, known in the
state of California to cause birth defects or other
reproductive harm.
Wash hand after handling
This appliance must be connected to a ground-
ed wiring system. If it should malfunction or
break down, grounding provides a safe path of
least resistance for electrical current, reducing
the risk of electrical shock. The cord for this
appliance has an equipment-grounding con-
ductor and a grounding plug. It must only be
plugged into an outlet that is properly installed
and grounded in accordance with all local
codes and ordinances.
Grounding Pin
connection of the equipment-grounding
conductor can result in a risk of
electrical shock. Check with a qualified
electrician or service person if you aren't
sure if the outlet is properly grounded.
not fit the outlet, have a proper outlet
installed by a qualified electrician. This
appliance is designed for use on a
nominal 120-volt circuit, and has a
grounding attachment plug that looks
like the plug in the drawing above.
Make certain that the appliance is
connected to an outlet having the
same configuration as the plug. No
plug adapter should be used with
this appliance.
This model is for household use only.


   Also See for Bissell 5200 Series

   Related Manuals for Bissell 5200 Series

This manual also for:

Flip-it 5200 series

Comments to this Manuals

Symbols: 0
Latest comments: