Working In Summer / Winter; Handle Heating (Only Ps-6400 H, 7300 H, 7900 H) - Dolmar PS-6400 Instruction Manual

Working in winter
In order to prevent carburetor icing in conditions of low tempe-
rature combined with high humidity, and below + 5°C in order
to get up to operating temperature faster, heated air can be
taken from the cylinder.
Remove the fi lter hood (see „Cleaning air fi lter")
Remove the insert (10) and insert it as shown in position B for
cold-weather operation.
At temperatures above + 5°C the carburetor must NOT be fed
heated air. Failure to follow these instructions can lead to
damage to the cylinder and piston!
At temperatures over +5°C place the insert in position A for
normal operation.
Position A - Normal operation
Position B - Cold-weather operation
Reinstall the fi lter hood.
Handle heating
(only PS-6400 H, PS-7300 H, PS-7900 H)
The electrically heated handles are activated by pushing the
switch (11).
On: red marking on switch visiable
Off: red marking on switch not visiable
B A
10
11
C
D
19