Table of Contents
Advertisement
7.
Slide the card into the slot ensuring that the card edge
connector engages correctly with the socket on the riser board.
Do not use excessive force.
8.
Secure the card by replacing the screw that you removed in
Step 4.
9.
Connect any necessary signal cables to the card. See the
documentation for the card for information.
10. Check to ensure no other cables or connectors have become
dislodged and replace the system panels.
11. Read the manuals supplied with the card and follow any other
installation requirements, such as software etc.
E x p a n s i o n c a r d s
FT1200 OWNER'S HANDBOOK
4/7
Advertisement
Table of Contents
Troubleshooting
