Britax Elite User Manual page 8

3
Pull the shoulder strap out off the
chest pad. Then push the chest pad
through to the back of your car seat.
5
Re-thread the shoulder strap through
the chest pad and back through your
chosen shoulder slot in the cover and
seat. Make sure it is not twisted.
7
4
Select the required shoulder slot and
push the chest pad through to the
front of your car seat.
6
Hook the shoulder strap back on to
the yoke. Make sure the adjuster strap
is not twisted.
Pull the strap forward to remove any
slack. Make sure the harness is
threaded through the buckle tongues
as shown. Repeat from step 2 with the
other strap. Then zip the cover back
up and fasten the head support in
place.
- 7 -