Installation Instructions Location; Window Kit Installation - Sylvania Air Conditioner Owner's Manual

INSTALLA TION INSTRUCTIONS
Horizontal
window
Window Slider Kit
Minimum:67.5cm(2.22ft).
Maxmum:123cm(4.04ft).
Horizontal
window
Window Slider Kit
Minimum:67.5cm(2.22ft).
Maxmum:123cm(4.04ft).
8
Fig.7
Fig.8
Fig.9
INSTALLA TION INSTR UCTIONS
Location
The air conditioner should be placed on a firm
foundation to minimize noise and vibration. For
safe and secure positioning, place the unit on a
smooth, level floor strong enough to support the unit.
The unit has casters to aid placement, but it should
only be rolled on smooth, flat surfaces. Use caution
when rolling on carpet surfaces. Do not attempt to
roll the unit over objects.
The unit must be placed within reach of a properly
rated grounded socket.
Never place any obstacles around the air inlet or
outlet of the unit.
Allow at least 12 in .
efficient air-conditioning.

Window kit Installation

Your window kit has been designed to fit most
standard Vertical and horizontal window
applications, However, it may be necessary for you to
improvise/modify some aspects of the installation
procedures for certain types of window. Please refer
to Fig. 8 & Fig.9 for minimum and maximum window
openings.
Note: If the window opening is less than the mentioned
minimum length of the window slider kit, cut the one
with holes in it to fit window opening.
Never cut out the hole in window slider kit.
Also in some isolated cases Duct Tape may be needed
to secure the Hose installation.
of space from the wall for