Sylvania Air Conditioner Owner's Manual page 11

INSTALLATION INSTRUCTIONS
Window
panel
Foam seal
10
Installation in sliding sash windows
Foam seal A
1. Cut the foam seal(adhesive type) to the proper length and
(adhesive type)
attach it to the window frame. See Fig.14.
2. Attach the window slider kit to the window sill. Adjust the
length of the window slider kit according to the length of
Fig.14 window, short
window is less than 27 inches.
Open the window sash and place the window slider kit on
26.5 ~ 48
3. Cut the foam seal(adhesive type) to the proper length
and attach it on the top of the window
Fig.16.
4. Close the sliding sash securely against the window.
Fig.15
5. Cut the foam seal to an appropriate length and seal the
Fig.16
Fig.17
the adjustable window kit if the length of
the window s . See Fig.15.
open gap between the inner
sash. Show as in Fig.17.
. Show as in
window sash and outer window