Installation In Double-Hung Sash Windows - Sylvania Air Conditioner Owner's Manual

Foam seal A
(adhesive type)
26.5 ~ 48
Window s
Window s
Foam seal
Installation in a double-hung sash
windows
1. Cut the foam seal(adhesive type) to the proper length and
attach it to the window s l. Fig.10
2. Attach the window slider kit to the window s . Adjust the
Fig.10
length of the window slider kit according to the width of
window, short
window is less than 27 inches.
Open the window sash and place the window slider kit on
the window s . Fig.11
Window kit
3. Cut the foam seal(adhesive type) to the proper length
and attach it on the top of the window
4. Close the window sash securely against the window
Fig.11
5. Cut the foam seal to an appropriate length and seal the
open gap between the top window sash and outer window
sash. Show as in Fig.13.
Window kit
Fig.12
Fig.13
INSTALLATION INSTRUCTIONS
the adjustable window kit if the width of
. Show as in Fig.12
.
9