Installation Instructions Location; Window Kit Installation - Sylvania SYL-14PE Owner's Manual

INSTALLATION INSTRUCTIONS
A:30cm~100cm(0.98ft~3.28ft) B:30cm~100cm(0.98ft~3.28ft)
Horizontal
window
Window Slider Kit
Minimum: 56.2 cm (1.84 ft)
Maximum: 98.2 cm (3.22ft)
Horizontal
window
Window Slider Kit
Minimum: 56.2 cm (1.84 ft)
Maximum: 98.2 cm (3.22ft)
bolt
9
Fig.7
Fig.8
Fig.9
Window slider kit
Fig.9a
INSTALLATION INSTRUCTIONS
Location
The air conditioner should be placed on a firm
foundation to minimize noise and vibration. For
safe and secure positioning, place the unit on a
smooth, level floor strong enough to support the unit.
The unit has casters to aid placement, but it should
only be rolled on smooth, flat surfaces. Use caution
when rolling on carpet surfaces. Do not attempt to
roll the unit over objects.
The unit must be placed within reach of a properly
rated grounded socket.
Never place any obstacles around the air inlet or
outlet of the unit.
Allow at least
0.98ft to 3.28ft
unit and the wall to ensure efficient air-conditioning.
Insulation tape may be required for a better fit in
some case.
Window slider kit Installation
Your window slider kit has been designed to fit most
standard Vertical and horizontal window
applications, However, it may be necessary for you to
improvise/modify some aspects of the installation
procedures for certain types of window. Please refer
to Fig. 8& Fig.9 for minimum and maximum window
openings.Window slider kit can be fixed with a bolt
(see Fig.9a).
Note: If the window opening is less than the mentioned
minimum length of the window slider kit, cut that one
with a hole in it short to fit for the window opening.
Do not cut out the hole in the window slider kit.
of space between the