OPERATOR SPECIFICATIONS
Carton Inventory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
OPERATOR WARNINGS
Gate Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
OPERATOR MOUNTING
MECHANICAL OPERATOR FEATURES
Manual Disconnect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
OPERATOR WIRING & PROGRAMMING
Program Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22-23
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25-26
WARNING
Mechanical
CAUTION
WARNING
WARNING
Electrical
WARNING
CAUTION
T A B L E O F C O N T E N T S
IMPORTANT NOTE
• BEFORE attempting to install, operate or maintain the operator,
you MUST read and fully understand this manual and follow all
safety instructions.
• These instructions are intended to highlight certain safety
related issues. These instructions are not intended to be
comprehensive. Because each application is unique, it is the
responsibility of the purchaser, designer, installer and end user
to ensure that the total gate system is safe for its intended use.
CARTON INVENTORY
Before beginning your installation check that all components
were supplied and received undamaged. Refer to list below for
factory supplied parts.
HARDWARE KIT
SL540 (K77-SL540) & SL570 (K77-SL570)
When you see these Safety Symbols and Signal Words on the
following pages, they will alert you to the possibility of serious
injury or death if you do not comply with the warnings that
accompany them. The hazard may come from something
mechanical or from electric shock. Read the warnings carefully.
When you see this Signal Word on the following pages, it will
alert you to the possibility of damage to your gate and/or the gate
operator if you do not comply with the cautionary statements that
accompany it. Read them carefully.
2
2
Part No.
Description
01-G0582
Gate Safety Brochure
02-401-SP
PBS, Stop Button
10-3209
Gate Bracket
19-3020
Nickel Plated Chain #40
19-3025
Nickel Plated Chain #50 (SL570 Only) 1
19-40001M
Master Link #40
19-50MLNP
Master Link #50 (SL570 Only)
40-3505
Warning Sign
80-3001
U-bolt, 2", 5/16-18
80-3002
U-bolt, 3", 3/8-16
MG6400035
Flat Washer 7/16"
84-RH-38
Hex Nut 3/8-16
85-LS-31
Lock Washer 5/16"
85-LS-38
Lock Washer 3/8"
MG3100878
Eyebolt, #40/#50 Chain
MG6100113
Hex Nut 5/16-18
MG6100117
Hex Nut 7/16-14
82-QN43-12
Square Head Set Screw 7/16-14
85-FW-38S
Flat Washer 3/8"
MG6400035
Flat Washer 7/16"
85-LS-43
Spring Washer 7/16"
Qty.
1
1
2
1
2
2
2
4
4
4
8
8
8
2
8
4
4
8
4
4
WARNING
WARNING
WARNING
WARNING