Names And Functions Of Wireless Remote Control - Trane 4MXW6-A Owner's Manual

Split system (r-410a) inverter multi-split 9.000 to 34.000 btu/hr
Hide thumbs Also See for 4MXW6-A:
Table of Contents

Advertisement

Remote Control Operation
Notice: This is a general use remote controller, and not all features may be included
with your system. Some buttons may be de-activated.
Remote control
BLOW
TURBO
10

Names and functions of wireless remote control

BLOW Button
In the cool or dry mode, pressing the button
once will activate the " blow " function ( see
page 12 ): Press the button once and "DRY"
will be displayed and the blow function will
be active. Press the button a second time
and "DRY" will be concealed and the blow
function is canceled. If operating the ON/
OFF button and changing the mode from
COOL to DRY, the status of BLOW will
stay in the original position. This function is
not available under the AUTO, FAN or
HEAT mode.
TURBO Button
In Cool or Heat mode, use this button to
activate the Turbo function. When the signal
is displayed, the unit will run at the highest
fan speed to rapidly cool or heat the room to
the preset temperature as quickly as possible.
Turbo mode is automatically cancelled if the
mode or fan speed is changed.
+
+ Button
Use this button to increase the
temperature setting. Depress the button
continuously for two seconds to increase
the setting rapidly. Release the button to
send the seting to the unit, and the
will be continuously displayed. Temperature
range for Celsius degree setting is 16-30;
for Fahrenheit degree setting is 61-86.
This temperature adjustment is no
available in the AUTO mode.
-
- Button
Use this button to decrease the temperature
setting. Depress the button continuously
for two seconds to decrease the setting
rapidly. Release the button to send the
setting to the unit, and the
continuously dispalyed. Temperature range
for Celsius degree setting is 16-30; for
Fahrenheit degree setting is 61-86.
This temperature adjustment is not available
in the AUTO mode.
.
LIGHT
LIGHT Button
When unit is powered on, Light On is
defaulted. Use this button to switch
between Light On and Light Off.
will be
MS-SVU42A-EN

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents