Loading/threading the film - Encapsulating
Please follow the step by step guide below to correctly load your film;
Remove the safety guard
Remove the feed tray by retracting the bolt
NOTE: Indents are drilled in the
Completely unscrew the mandrel
mandrels to locate core holder so
Remove the top mandrel
and cap
top and bottom films line up
Load the film onto the mandrel and
make sure it is loaded with the film
coming off the bottom of the roll
with the adhesive side up. Tighten
Refit the mandrel complete with
the screw back up with screwdriver
Core holder located on mandrel
the loaded film
provided
6