Advertisement
Table of Contents
- 1 Table of Contents
- 2 Safety Precautions
- 3 Machine Parts and Stand (Options Extra) Assembly
- 4 Control Panel and Functions of Digital Display
- 5 Operating Instructions
- 6 Loading/Threading the Film
- 7 Cleaning and Maintenance
- 8 Troubleshooting
- 9 Specification Chart
- 10 Warranty and Incorrect Use
- Download this manual
See also:
Instruction Manual
Advertisement
Table of Contents
Related Manuals for Linea DH-360
Summary of Contents for Linea DH-360
- Page 1 Product instruction manual Linea DH-360, DH-460 and DH-650 The Linea has been designed to be user friendly, however we strongly recommend you take a few minutes to read through this manual to ensure correct operation. Keep this manual safe for future reference.
-
Page 2: Table Of Contents
Thank you for purchasing the Linea. Please read through this instruction booklet carefully and keep it safe in case needed for future reference. Contents Page 2 - Safety precautions Page 3 - Machine parts and stand (options extra) assembly Page 4 - Control panel and functions of digital display... -
Page 3: Machine Parts And Stand (Options Extra) Assembly
Machine parts and stand assembly Heating roller Core adapter Top roll shaft Top stabilizer bar Supply roll tension knob Safety shield Active bolt Roller pressure knob Left side cover Feed guide Control panel Feed table Right side cover Stand assembly (Optional with DH-650) -
Page 4: Control Panel And Functions Of Digital Display
Control panel and functions of the digital display Error messages Should the LCD display panel show the words OPN fault or CLS fault, there maybe a problem with your machine. This very rarely occurs but if it does contact your supplier immediately and turn off the power. -
Page 5: Operating Instructions
Speed control The speed control function allows adjustment of the speed of the machine. This can be manually adjusted by turning the knob anti clockwise to increase the speed and clockwise to decrease the speed. The speed can range from 0M per min to 1.4M per min Hot and cold settings To change the function of the machine to either hot or cold press the HOT/COLD switch. -
Page 6: Loading/Threading The Film
Loading/threading the film - Encapsulating Please follow the step by step guide below to correctly load your film; Remove the safety guard Remove the feed tray by retracting the bolt NOTE: Indents are drilled in the Completely unscrew the mandrel mandrels to locate core holder so Remove the top mandrel and cap... - Page 7 Film threading diagram - Auto memory function The linea has an auto memory function, that means if you work on the same roll of film, the temperature and speed will be set to the smae settings as the last time the machine...
-
Page 8: Cleaning And Maintenance
The adhesive side of the film may be facing the roller. Stop the operation, wait until the laminator has cooled down and thread the film again in the correct manner. Specification chart MODEL DH-360 DH-460 DH-650 MAX LAMINATING WIDTH... -
Page 9: Warranty And Incorrect Use
Warranty & Incorrect Use IMPORTANT INFORMATION Your laminator should reach you in perfect condition, however please retain all original packaging once you have unpacked your laminator in case you need to return it to us. If your laminator arrives damaged or faulty in anyway, this must be reported to your supplier immediately.