Memory Functions - Mercedes-Benz COMAND Operator's Manual

Audio
Radio operation

Memory functions

You can use the following functions:
Saving stations manually (FM, AM)
Saving stations automatically FM, AM
( page 48)
Selecting a station from the FM/AM
preset menu ( page 49)
Selecting a station from the FM/AM
Auto presets ( page 49)
46
Saving stations manually (FM, AM)
In the Radio main menu
Activate the desired wave band
( page 41).
Press one of the number keys, e.g. 2,
longer than 2 seconds.
You will hear a verification beep if the
beep tones option was activated in the
system settings ( page 178).
The radio saves the current station at
the memory preset selected. The me-
mory preset selected will appear in the
status bar, e.g. FM2 .
i
There are 10 presets available (1 -
9, 0).
An existing entry is overwritten in the
memory list when a new input is given.
On the memory list
Activate the desired wave band
( page 41).
Press the Presets soft key.
The memory Preset menu will appear.
Push the joystick to H, h or g,
G to highlight the desired memory
preset.