Incorrect Values At U602 Pin 25 (Modulus Control); Incorrect Voltage At Positive Steering Line; Incorrect Values At U602, Pin 27; Review Of Synthesizer Fundamentals - Motorola ASTRO Digital Spectra Service Manual

Uhf/vhf/800 mhz mobile radios
Hide thumbs Also See for ASTRO Digital Spectra:
Table of Contents

Advertisement

Troubleshooting Procedures: ASTRO Spectra Procedures

4.1.4.1.2 Incorrect Values at U602 Pin 25 (MODULUS CONTROL)

If the frequency is not 6.25 kHz (or 5.0 kHz for VHF), verify the proper VCO pin-shift logic. See VCO
block diagram
(Figure
5 dBm at proper VCO frequency. Use the following table:
Band
VHF
UHF
800 MHz
If the VCO is running at approximately the correct level and frequency, proceed to "Incorrect Values
at U602, pin 27."

4.1.4.1.3 Incorrect Voltage at Positive Steering Line

Verify that the VCO is running; check VCO feedback for -10 to 0 dBm. Verify that the feedback buffer
(if used) is working check U601-1.

4.1.4.1.4 Incorrect Values at U602, pin 27

Check prescaler (U601) operation; U601-40 should be:
EQUATION: F = F

4.1.4.2 Review of Synthesizer Fundamentals

1. The synthesizer is a phase-locked loop system with a sample-and-hold phase detector.
2. In a locked system, the prescaler, in conjunction with the counters in the synthesizer chip,
counts the VCO frequency down to the reference frequency. Think of this division process as
a time domain function rather than frequency domain.
3. For each reference period (if using 6.25 kHz reference), you have 160 microseconds in which
the VCO frequency is divided by N. Recall the equations:
EQUATION: N = F
EXAMPLE: N = F
EQUATION: A = (fractional remainder of N/P) (P)
EXAMPLE: A = N/P = 72,000 / 255 = 282.3529; .3529 x 255 Or A=90
EQUATlON: B = [N - {A x (P + 1)}] / P
EXAMPLE: B = [72,000 - {90 x (255 +1)}] or 192
68P81076C25-C
4-1) for pin-shift logic. Also, check the VCO feedback for approximately -10 to

Table 4-3. Feedback Frequency Ranges

VCO Feedback Frequency
TX Freq x 2 or
RX Freq + 109.65 MHz
TX Freq or
RX Freq + 109.65 MHz
TX Freq / 2 or
(RX Freq - 109.65 MHz) / 2
/(P or P+1)
vco
/ F
vco
r
/ F
= 450 MHz / 6.25 kHz or 72,000
vco
r
4-7
July 1, 2002

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Digital spectra plusAstro digital spectra plus

Table of Contents