Viper 791 XV Installation Manual page 37

5. Release. Once the code is learned, the Valet®/Program button can be released.
You can advance from one channel to another by releasing the Valet® /Program button and tapping it to advance
channels and then HOLDING it. For example, if you want to program Channel Three after programming Channel
One, release the Valet®/Program button. Press it twice and release it to advance to Channel Three. Then press it
once more and HOLD it. The siren will chirp three times to confirm it is ready to receive the code from the trans-
mitter.
Learn Routine™ will be exited if:
Ignition is turned off.
Door is closed.
Valet®/Program button is pressed too many times.
More than 15 seconds elapses between steps.
One long chirp indicates that Learn Routine™ has been exited.
© 2003 Directed Electronics, Inc. Vista, CA
37