Parameter
Device Name
Automatic IP
Fixed IP
Click Apply button at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the Access Point.
Chapter4 Troubleshooting
This chapter provides solutions to problems usually encountered during the
installation and operation of the Access Point.
1. How to manually find your PC's IP and MAC Address?
1) In Windows, open the Command Prompt program
2) Type Ipconfig /all and Enter
1
Your PC's IP address is the one entitled IP address
2
Your PC's MAC Address is the one entitled Physical Address
2. What is BSS ID?
A group of wireless stations and an Access Point compose a Basic
Service Set (BSS). Computers in a BSS must be configured with the
same BSSID.
3. What is ESSID?
An Infrastructure configuration could also support roaming capability
for mobile workers. More than one BSS can be configured as an
Extended Service Set (ESS). Users within an ESS could roam freely
Description
It shows current FW version.
Selecting this option is not advised unless you have direct access to the
device that provides the IP address.
Specify IP: Designate the Access Point's IP Address. This IP Address
should be unique in your network. The default IP Address is 192.168.2.1.
Subnet Mask:
Specify a Subnet Mask for your LAN segment.
Specify the default gateway IP of this Access Point.
Gateway: