Site Survey Table - Edimax EW-7203APg Manual

Edimax 802.11g wireless access point manual
Hide thumbs Also See for EW-7203APg:
Table of Contents

Advertisement

Channel
Security
Preamble Type
Transmit Rate
Click Apply button at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the Access Point.

Site Survey table:

peer-to-peer communication.
Infrastructure: It can let your network device join a wireless LAN
through an access point.
Select the appropriate channel from the list provided to correspond with
your network settings. Channels differ from country to country.
Channel 1-11 (North America)
Channel 1-14 (Japan)
Channel 1-13 (Europe)
There are 14 channels available.
Disable: Disable the security function.
WEP: WEP is an authentication algorithm, which protects authorized
Wireless LAN users against eavesdropping. The Authentication type and
WEP key of wireless stations must be the same with the Access Point.
This Access Point supports 64/128-bit WEP Encryption function. With this
function, your data will be transmitted over the wireless network securely.
# You can refer to the detail setting from chapter 3.2.6.
WPA: You can use a pre-shared key to authenticate wireless stations
and encrypt data during communication. When you enabled WPA mode,
you can not use WEP encryption.
# You can refer to the detail setting from chapter 3.2.7.
Preamble type defines the length of preamble block in the frames during
the wireless communication.
Auto select: It will auto switch to the more suitable method.
Short: It is suitable for high traffic wireless network
Long: It can provide more reliable communication
When you enable the station mode selection to "802.11b" and it allows
you to select the speed of 1-11Mbps. When you enable the station mode
selection to "802.11g" and it allows you to select the speed of 1-54Mbps.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

802,11g

Table of Contents