Toshiba TECRA M11 Series Maintenance Manual page 224

Each ID and its details are listed in the following table.
ID Attribute Name
1h Raw read error rate
2h Throughput performance
3h Spin up time
4h Start/Stop count
5h Reallocated sector count
7h Seek error rate
8h Seek time Performance
9h Power on hours
Ah Spin retry count
Ch Device power cycle count
C1h Load/Unload cycle count
C2h Temperature
C4h Reallocation event count
C5h Current pending sector count
C6h Off-line scan uncorrectable sector
count
TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813) [CONFIDENTIAL]
Description
Read error rate
Rate of errors which occur when the
HDD reades data.
Throuput performance
Start-up time of spindle mortor
Averate time from turning the power on
to starting spinning
Number of stops of the spindle morotr
after the factory setting
Number of defective sectors for which
alternative processing was performed.
Rate of seek errors
Processing time of sequential seek and
random seek
Power-on hour after the factory setting
Number of retires of spinning up within
the prescribed rate
Number of power-on/power-off
operations of HDD
Number of head loads
Past maximum temperature, past
minimum temperature, current
temperature
Number of alternative sector events
Number of currently defective sectors
Number of sectors that could not be
corrected during Off-line scan
Tests and Diagnostics
3-115