Encore ENUWI-2XN4x User Manual page 32

[ Option 2: Entering the Adapter's PIN Code to the Router or Access Point ]
Note: To enter your adapter's PIN code to your router or access point, you need to know
your router or access point's IP address.
A computer

connection.
different
A computer

connection.
A.
B.
directly connects to the router or access point through wired
This computer can be the one with ENUWI-2XN4 installed on or a
one.
already connects to the router or access point through wireless
For example, this could be your laptop computer.
www.encore-usa.com
In addition, you need to have one of the following:
Go to the "Wi-Fi Protected Setup"
1.
tab.
Click on "Pin Input Config (PIN)"
2.
Within two
3.
wireless adapter's PIN code into
your router or access point's
Web-based Utility through a web
browser.
Note: To complete
know your router or access point's
address to access its Web-based Utility.
Once connected, the tab will

automatically switch to the "General"
tab. The 'Signal Strength' and 'Link
Quality' bars will become active and
green.
Note: The 'Encore Wireless Manager
Tray Icon' at the lower right corner of the
screen will become green as well.
31
minutes, enter the
3, you need to
Step
IP